Card careQuestion
Oversized Card Sleeves: What Fits Jumbo and Oversize Cards
Oversized card sleeves fit cards up to 3-1/2 x 5 inches; bigger jumbo cards need 5 x 7 sleeves and toploaders. Measure first, then match the size.
We earn from qualifying purchases through links on this page.

At a glance
- Oversized deck protectors
- Fit cards up to 3-1/2 x 5 in (Ultra PRO, 40 per pack)
- 5 x 7 soft sleeves
- Fit cards up to 5 x 7 in (Ultra PRO, 100 per pack)
- 5 x 7 toploaders
- 127 x 177.8 mm, 1 mm thick, 25 per pack
- Standard card size
- 63 x 88 mm
Oversized card sleeves fit cards larger than the standard 63 x 88 mm. Ultra PRO’s oversized Deck Protector sleeves take cards up to 3-1/2 x 5 inches. Larger jumbo cards, like the oversize promos in many Pokemon collection boxes, need 5 x 7 inch sleeves and matching 5 x 7 toploaders. Measure the card before you buy.
Which oversized card sleeve size you need
The right oversized card sleeve depends on one measurement: the card’s width and height. Match it to the smallest sleeve that is larger than the card.
| Card size | Sleeve to use | Pack size |
|---|---|---|
| Up to about 2-1/2 x 3-1/2 in (63 x 88 mm, standard) | Standard sleeves, see card sleeve sizes | Varies |
| Up to 3-1/2 x 5 in (88.9 x 127 mm) | Ultra PRO Oversized Deck Protector | 40 |
| Up to 5 x 7 in (127 x 177.8 mm) | Ultra PRO 5 x 7 Soft Sleeves | 100 |
| Up to 5 x 7 in (127 x 177.8 mm), rigid | Ultra PRO 5 x 7 Toploaders (after a soft sleeve) | 25 |
Ultra PRO’s oversized Deck Protectors load from the top, like a regular deck sleeve. The 5 x 7 soft sleeves are clear polypropylene, and Ultra PRO describes them as acid free with no PVC, suited to “photos, large cards, and matching size Toploaders.”
Oversized card sleeves
Live listings, shown by eBay
Opens eBay in a new tab. Check condition, seller feedback and returns.
Jumbo Pokemon cards and their sleeves
Jumbo Pokemon cards, which the official product pages call oversize cards, come in many Pokemon TCG collection boxes. Two recent examples:
- The Mega Greninja ex Premium Collection includes 1 oversize lenticular promo card, along with a foil promo, a tech sticker and 8 booster packs.
- The 30th Celebration Figure Collection includes 1 oversize foil card of Mew or Mewtwo, a foil promo, a figure and 5 booster packs.
Neither official page gives the oversize card’s measurements, which is why measuring matters. If your card is 3-1/2 x 5 inches or smaller, the oversized Deck Protectors fit. If it is larger, go straight to the 5 x 7 inch sleeves.
Measure the card, not the box
Lay the card on a ruler and check both edges. A sleeve that is a few millimeters too small will bend the corners as you push the card in.
Toploaders for oversized cards
A toploader for an oversized card works the same way as one for a standard card: a soft sleeve goes on first, then the sleeved card slides into the rigid holder. Ultra PRO’s 5 x 7 toploaders measure 127 x 177.8 mm, are 1 mm thick and come 25 to a pack, and Ultra PRO lists its 5 x 7 soft sleeves as the matching inner sleeve.
Size the toploader to the sleeve, not the bare card. A sleeved jumbo card that only just fits a toploader is hard to get back out. Our guide to sleeves and toploaders explains the soft-sleeve-then-toploader method for standard cards, and it carries over to bigger sizes.
Storing oversized cards long term
Oversized cards rarely fit a standard nine-pocket binder page or a standard storage box, so plan their storage separately. A few options:
- Toploaders in a drawer or box. Sleeved and toploaded jumbo cards stack flat in any box wide enough for a 5 x 7 holder.
- Binder pages sized for the card. If you use a trading card binder, check the pocket size on the page against your measurement before you buy.
- Display. Because 5 x 7 is a common photo size, a sleeved jumbo card in a 5 x 7 toploader can stand on a shelf or in a frame.
For the full picture on keeping a collection safe, see how to protect trading cards. Standard-size decks have their own cases, covered in our guide to wooden deck boxes.
Frequently asked questions
What size are oversized card sleeves?
Ultra PRO's oversized Deck Protector sleeves are sized for cards up to 3-1/2 by 5 inches. For anything larger, Ultra PRO's 5 by 7 inch soft sleeves fit cards up to 5 by 7 inches.
Do oversized sleeves fit jumbo Pokemon cards?
Only if the card is no bigger than 3-1/2 by 5 inches. The official product pages do not list a size for oversize cards, so measure the card first and move up to 5 by 7 inch sleeves if it is larger.
Where do jumbo Pokemon cards come from?
Many Pokemon TCG collection boxes include one. The Mega Greninja ex Premium Collection lists an oversize lenticular promo card, and the 30th Celebration Figure Collection lists an oversize foil card.
Can I put a sleeved jumbo card in a toploader?
Yes, if the sizes match. Ultra PRO pairs its 5 by 7 inch soft sleeves with its 5 by 7 inch toploaders, which measure 127 by 177.8 mm and are 1 mm thick.
Sources
- Clear Oversized Deck Protector Sleeves (40ct)Ultra PRO
- 5 x 7 Soft Sleeves (100ct)Ultra PRO
- 5 x 7 Toploader Sleeves (25ct)Ultra PRO
- Pokemon TCG: Mega Greninja ex Premium CollectionPokemon.com
- Pokemon TCG: 30th Celebration Figure CollectionPokemon.com
- Dragon Shield Matte SleevesDragon Shield
Filed under Card careStart with How to Protect Trading Cards: Sleeves, Toploaders, Binders, Boxes
Read next
How to Protect Trading Cards: Sleeves, Toploaders, Binders, Boxes
How to protect trading cards: sleeves for play, toploaders for valuable cards, binders for display, boxes for bulk, and the room conditions to store them in.
How to Buy Graded Cards: Cert Checks, Fake Slabs and Storage
Before you buy a graded card, check its cert number on the grader's own site, inspect the slab for tampering, and know how PSA, CGC and Beckett grades differ.
Wooden Deck Boxes: Sizing, Wood vs Plastic and Care
A wooden deck box holds a sleeved deck behind a wood lid, often with a magnetic catch. How to size one, how wood compares to plastic and how to care for it.
Card Sleeve Sizes: Which Sleeves Fit Pokemon, Yu-Gi-Oh! and Lorcana
Standard sleeves (about 66 x 91 mm) fit Pokemon, Lorcana and Flesh and Blood cards; Yu-Gi-Oh! needs Japanese-size sleeves. Sizes, thickness, double sleeving.



